Militec USA - for Air Conditioning Militec for Guns & Firearms Militec for Automobiles Militec for RV's & Truck Militec for Motorcycles Militec Store
Militec...         Militec videos

Militec USA - Synthetic Metal Conditioner

Fuel Economy...


With MILITEC, your car burns less gas!

In a landmark test performed by an agency of the US Department of Transportation, MILITEC delivered a solid 3% increase in fuel economy under very strictly-controlled laboratory conditions.

Another test just completed by the Australian Government used a fleet of delivery trucks, tracking their fuel consumption for over two year and 1,558,000 kilometers (nearly one million miles!). At the end of the test, the MILITEC group showed an average of 11.53% better fuel mileage compared to the control.

Militec - AC...

Auto Air Conditioning additive

Auto Air Conditioning additive

Militec AC

Militec Information

Militec has been keeping the united states military "cool under fire" for over 25 years.  it is used to protect weapons, engines, compressors, etc. under the harshest conditions including the desert.  By preventing friction, heat buildup and rust, Militec provides the essential lubrication required for 100% efficiency.

How Militec A/C works

Militec A/C is a patented metal conditioner which chemically bonds to the metal surfaces of your vehicles A/C compressor.  It is not a refrigerant oil which sometimes leaks from the systems.

Militec A/C treats metal surface allowing for greater lubrication.
One application of Militec last for 15,000 miles and contains no harmful chemicals such as PTFE, chlorinated paraffin's, graphite or fluorine.

The average cost of an A/C compressor breakdown can be as high as $2,500.00.  One yearly application of Militec A/C can substantially reduce that financial risk.

Email us for these great flyers for you Business - charlie@militecusa.com
Auto Air Conditioning additive Auto Air Conditioning additive
Flyer # 3 Militec AC Cool Protection
Flyer # 4 Militec AC Cool Protection

Militec A/C Movie

The Militec A/C applicator is equipped with a hose with a R-134a coupler.

Auto Air Conditioning additive

 

Instructions

  1. Start the engine and run the A/C system on maximum cooling in a well-ventilated area.

Caution-Keep away from fan belts and blades while engine is running.

  1. Remove the red cap and safety seal from the Militec A/C puck and screw the hose into the end of the puck until tight.
  2. Slide the Militec A/C puck into the applicator and screw in the applicator just enough so the puck will not slide out.
  3. Locate the low side port of your A/C system. (Don't worry the coupler will only go on the low side)
  4. Connect the R-134a coupler onto the low side port and turn the applicator until you see no Militec A/C left in the puck and remove the coupler from vehicle.
  5. Continue to run the system for 5 to 10 minutes to circulate Militec A/C.
  6. Turn off the engine and inspect the low side port for leaks.

Auto Air Conditioning additive

 

Militec seo pages

Militec - Grease...

Militec Grease

The Ultra - Premium Extreme Pressure
Multi - Purpose
Lithium - Complex Grease


BENEFITS OF MILITEC-1 GREASE

      • Reduced maintenance, extended lubricating intervals, increased equipment life
      • Reduction in operating temperatures - typically 10°F to 25°F
      • Extended bearing life - as much as 35% to 50%
      • Reduces corrosion, wear and galling
      • Stays in place and lubricates in the most severe conditions
      • Extremely wide variety of applications
      • Compatible with other lithium complex greases
      • Versatile temperature ranges
      • Bearings remain lubricated even after the grease is used
      • Prevents rust and oxidation
      • Excellent water washout resistance
      • Superior shock-load protection

       

    TYPICAL APPLICATIONS

    All Automotive and Fleet applications, including all Universal and CV joints, Chassis, Wheel Bearing, High-Temp Disc Brake, Steering Gear, Water Pump, Fifth wheel, etc.

    All "Off-Road" equipment used in Agriculture, Construction, Logging, and Mining where maximum protection against extreme shock loading and/or severe water washout is required.

    All Industrial applications, including conveyor belts, rock crushers, lumber mills, sand and gravel screens, oil field and offshore drilling equipment, marine deck equipment, etc.


    FORMULATION OF MILITEC-1 GREASE


    MILITEC-1 GREASE is made from very finest ingredients available. We use only premier-quality polymers, the best high-viscosity base oils, advanced anti-wear agents, natural rust inhibitors and superior lithium-complex soap thickeners.

    If we used nothing more than these fine ingredients, our grease would be equal or superior to any grease in the world. However, the final manufacturing step sets MILITEC-1 GREASE apart. We finish our blending by adding 15% MILITEC-1 Metal Conditioner by weight. MILITEC-1 Metal Conditioner is unique in its ability to form a physical and chemical bond within all metal surfaces.

    The result, MILITEC-1 GREASE, is unsurpassed in improving mechanical efficiency, reducing downtime, and preventing catastrophic failure.


    Extended Grease Intervals


    With MILITEC-1 GREASE, the frequency of re-greasing can be reduced in most applications. Since the MILITEC-1 Metal Conditioner contained in MILITEC-1 GREASE provides most of the lubrication, the grease itself does less actual work. The great reduction in internal friction, heat and wear means the grease maintains its original chemical and physical properties longer. Since the grease does not degrade as rapidly, it does not need to be replaced as frequently.

    The result? MILITEC-1 GREASE lasts longer than other greases, extending routine maintenance intervals.

    The benefits of MILITEC-1’s long-term lubrication potential are obvious in regular maintenance cycles. Our customers tell us they save not only in terms of time and labor, but they also cut expenditures on unscheduled down time.

    Versatility


    MILITEC-1 GREASE is extremely versatile. It can be used in an unusually broad range of applications. MILITEC-1 GREASE excels whether it is used in low-load, low-temperature operations such as vehicle U-joints; or the high loads and high temperatures typically found in large industrial gear and bearing systems.


    Effectiveness


    MILITEC-1 GREASE is uniquely effective. MILITEC-1 GREASE provides lubrication in extreme out-of-parameter circumstances that would cause other greases to fail. As the MILITEC-1 Metal Conditioner in the base grease migrates into the metal surface, it reacts chemically within the metal and becomes part of the metal. The result is constant molecularly-bonded lubrication throughout the entire greased mechanical component - even if the grease is lost.


    Summary


    MILITEC-1 GREASE improves efficiency, extends equipment life, reduces downtime and helps protect against unscheduled maintenance. MILITEC-1 GREASE will improve your "bottom line" by reducing energy usage, reducing maintenance costs, and reducing capital equipment replacement.

MILITEC-1 GREASE IS HERE!

          1. REDUCES FRICTION
          2. CONSTANT LUBRICATION
          3. CAUSES NO MATERIAL BUILD-UP
          4. INHIBITS CORROSION
          5. LONG LASTING

Militec Grease go to Store button

Increased Power...

With MILITEC, your car makes more power!

 

 

Tests done by Cosworth (famous builder of racing engines) showed impresive gains in peak horsepower after adding MILITEC.

For more information and
PDF file with chart

Militec USA

 

Nick Trask talks about Militec as "Hoursepower in a Bottle" with graphs.
Militec USA

Please go to our Testimonials page for additional information.
Militec USA

Reduced Emissions...

With MILITEC, your car helps our environment!

The City of Corona, California had eight vehicles that would not pass the annual smog inspection. After adding MILITEC with no additional maintenance, all eight passed easily. What's even more impressive, most of them still passed one year later, with no additional maintenance and NO ADDITIONAL MILITEC-1 ADDED!

The City of Corona estimated this saved them at least $15,000.00 in maintenance and repair costs.

Enhanced Reliability...

A two-year test done by a major East-coast Mass Transit Authority showed incredible reductions in maintenance and associated costs when MILITEC was applied to their busses. During the first one-year test period,  20.1% of the non-MILITEC control group had engine problems. During that same period, only 12.7% of the MILITEC group had engine problems. During the second one-year test period, 25.4% of the control group had engine problems, while only 13.8% of the MILITEC group had engine problems.

The Mass Transit Authority estimated that if they had used MILITEC on ALL the buses in their system, it would have saved them approximately $920,000.00 in maintenance, engine replacement, and associated costs

 
Militec USA